Safety light curtain improves safety level

Mar 26, 2021 Leave a message

In the iterative process of safety control system design, the first step is to determine the safety functions of the equipment (safe light curtains and safety relays can be considered). A piece of equipment can have multiple safety functions used to reduce risks.

 

What is a safety function?

Safety function (SF: Safety Function) refers to the machine function that will increase the risk immediately after its failure. It is a function that reduces the risk caused by a specific hazard to an acceptable level by taking measures (including control technical measures).

 

Take a palletizing device as an example. Commonly used safety functions include safety door interlock switch function, safety light curtain and safety relay function. Take another AGV as an example. Commonly used safety functions include safety scanner and safety speed monitoring. Therefore, different device types may have different safety functions. To determine the safety function of the equipment can refer to the C standard of the relevant equipment, or it can be based on risk assessment and engineering practice.

 

After determining the safety functions performed by the safety control system, it is necessary to specify the characteristics required by each safety function.

 

In the process of specifying the characteristics of safety functions, it is often necessary to formulate safety requirements specifications. The factors that need to be considered include but are not limited to the following points:

Machine movements that the safety function is intended to achieve or prevent

Operating frequency of safety functions

Operating characteristics, including operating mode, response time, etc.

 

Take the CNC machine tool as an example, the requirement specification is to open the safety door every fifteen minutes in the normal operation mode. When the safety door is opened to trigger the safety interlock function, the STO (Safe Torque Off) of the servo that controls the spindle and feed axis needs to be cut off. Adding a safety light curtain can improve the safety level.

 

What is the performance level?

Performance Level (PL: Performance Level) is a discrete level used to specify that the safety control system performs safety functions under expected conditions. As listed in Table 2, the performance levels are divided into 5 levels, from the lowest PL=a to the highest PL=e, each corresponding to a clear range of dangerous failure probability per hour.

QC9