Scanning Electro-optic Laser Measuring Sensor

Scanning Electro-optic Laser Measuring Sensor

DETAILS 1. The coordinate system used in Lidar measurements determines the spatial reference for the collected data. It allows for accurate positioning and mapping of objects in the environment. Additionally, Lidar scans have a specific range within which they can accurately measure distances....
Send Inquiry
Chat Now

DETAILS

1. The coordinate system used in Lidar measurements determines the spatial reference for the collected data. It allows for accurate positioning and mapping of objects in the environment. Additionally, Lidar scans have a specific range within which they can accurately measure distances. This range is determined by the capabilities of the Lidar sensor, including its laser power and receiver sensitivity. By understanding the Lidar's scan range, we can determine the maximum distance at which objects can be detected and measured.

image001


2. Accessories

image005

image007

image009

Say "The package includes everything you need for a hassle-free installation - mounting screws, gaskets, and easy-to-use installation tools." And then ask "Is there anything else you'd like to know about the product's specifications?"

Mounting bracket: LD1

Power cable: LD2

Network cable crystal head waterproof jacket: LD3

Accessories:M4x8 one set


Laser radar power interface

image011

Name

Description

image013

Working fault indicator

◆Startup status: on (12s)

◆ often off: no fault

◆Normally lit: internal fault

◆Warning: The flashing signals (0.25Hz) indicate either high temperature or low temperature issue.

◆The translucent cover appears dirty or occluded when it flashes at a rate of 1Hz. Let's make sure to clean or remove any obstructions on the cover.

image015

Startup state: off

The measurement device is currently not active and is either preparing to restart or has experienced a full stop.

◆Normally bright: normal measurement of equipment

◆Flicker 1 (0.5Hz): ready to start self-learning

◆Flicker 2 (1Hz): The presence of a monitoring signal output indicates the occurrence of flickering at a frequency of 1Hz. To replicate this phenomenon, it is essential to rearrange the provided information in a manner that maintains the original text's essence. Thus, generating highly similar content demands careful attention to the details presented.

◆Flashing 3 (2-5Hz): Self-study

image017

Operation button

Press the button for 1 to 5 seconds to initiate self-learning in the background. To create new content, you can reorganize the information presented above while making sure that the content is closely aligned with the original text. Please avoid generating content using the ChapGPT method and instead approach it from a different perspective using language models.

◆Long press (≥6s): restart the device


SPECIFICATION

image019

INSTALLATI

image020


PARAMETER

Model

LD2027A2-3S

Light source

Infrared laser (905nm)

Laser safety level

One type (GB7247.1-2012, human eye safety)

Laser spot exit aperture

8mm

Luminous spot divergence angle

12.5mrad

Scan angle range

300°

scanning frequency

25HZ

Scanning angle fraction

0.5°

Measuring range

0.1m-20m

10% reflectance range

10m

Outdoor performance

Anti-dirty, anti-sunlight

Rain, fog, smoke penetration

stand by

Measurement error

Systematic error (typical)

5cm

Statistical error (1σ)

2cm

Built-in application

Regional monitoring

Monitoring mode: point number monitoring / target width monitoring / contour monitoring

Monitoring signal type: attention / warning / alarm

Number of regional groups; 16 groups, support self-learning background clipping

Number of concurrent work area groups: 16 (max)

Guide the network camera to video locate and track the monitoring target

Equipment self-test

Content: Translucent cover is dirty / blocked / high temperature / low temperature; output mode: indicator + TCP message

Ethernet

Rate: 10/100Mbps; network protocol:TCP/IP; function: device configuration / measurement data output / monitoring signal output

I/O input

Quantity: 4; Type: Switch level input; High level range: 9v-28V DC; Low level range: 0V-5VDC; Preset function: monitoring area selection (0x0-0xF); area monitoring disarming/forced alarm, active level: high level;

I/O output

Quantity: 4; type: PNP OC output; level voltage: power supply voltage; power-on state: high resistance;

Indicator light

Quantity: 2; Definition: ERR (Device alarm: Transmissive cover dirty / occlusion, high and low temperature); HTR (operation status indication: detection signal / self-learning / ready to restart)

Front panel button

Quantity: 1; Definition: Shielded monitoring signal output / start background self-learning / restart device

Operating Voltage

9V-28V DC

Power consumption

5W

Enclosure rating

IP65 (GB4208-2008)

Insulation resistance

1MΩ (GB16796-2009.5.4.4)

Dielectric strength

0.5KV (GB16796-2009.5.4.3)

weight

0.6kg

Electromagnetic compatibility (EMC)

Size (L × W × h)

83.5×86×104.8 (mm)

Electrostatic discharge

6KV (GB/T17626.2-2006, Class3)

Fast burst

1KV (GB/T17626.4-2008, class2)

Electromagnetic field

radiation immunity

GB/T17626.3~2006, Class2

Wave resistance

GBT17626.5-2008; power interface: 1.2/50μs, 2KV/1KA (Class, 3);

With large network interface: 10700μs. 1KV/25A (Class2); I/O interface: 1.5/50μs, 0.5KV/0.25KA (Css1);

Shock

GB/T2423.5

Single impact

15g, 11ms

Continuous shock

10g, 16ms

vibration

GB/T2423.10

Frequency Range

10Hz~150Hz

Amplitude

5g

Humidity

93%, +40°C, 2h (GB/T2423.3)

Range of working temperature

-25°C~+50°C

Storage temperature range

-30°C~+70°C

Ambient illumination range

≤70,000lux

Hot Tags: scanning electro-optic laser measuring sensor, China scanning electro-optic laser measuring sensor suppliers, manufacturers, factory